How It Works
-
1. FILL
bottle with 350 mL of warm water, stopping just below where the bottle begins to slope.
-
2. DROP
two tablets, let them fully dissolve (~30 mins), then attach the pump.
-
3. ENJOY
a rich, moisturizing, gentle foam with a refreshing clean!
Care Instructions
To maximize the lifespan of your foaming pump, follow these steps before each refill:
- RINSE: Gently hand wash the bottle and pump, then fill the bottle with warm water.
- FLUSH: Reattach the pump and flush until water runs clear (~20–30 pumps), then empty the bottle.
- DRAIN: Take the pump out, flip it upside down, and pump it a few times to clear out any leftover water.
Your bottle and pump are now clean and ready for the next refill!
FAQs
What type of water works best?
We recommend using softened or distilled water, as well as water filtered by Reverse Osmosis (RO) or ion-exchange systems (like ZeroWater).
Dissolved minerals found in hard water bind with the surfactants in the tablet, which reduces the soap's effectiveness and lather. For this reason, standard carbon filter pitchers (like Brita) won't remove these hard minerals and are not recommended if your tap water is hard.
Can I use my own bottle?
Absolutely! Any foaming soap bottle will work — just make sure it’s clean before refilling. Use 350ml of warm water for 2 tablets (or 175ml for 1 tablet) and make sure the tablets are fully dissolved before pumping to avoid clogs.
Will your soap work with a non-foaming bottle?
Our tablets are designed for foaming soap bottles, so they will not lather in standard liquid soap or squeeze bottles. Use with your Plenishful foaming bottle for optimal results!
How long does it take to dissolve?
Usually 20–30 minutes in warm water. Cooler water works too, but may take a bit longer.
Can I make half portions?
Yes! Drop one tablet into 175ml of warm water (about half a bottle) for smaller batches.
Are the ingredients natural?
Our tablets use plant-based, biodegradable ingredients that are non-toxic, septic-safe, and gentle on skin — no parabens, sulfates, or artificial dyes.
Are they safe for sensitive skin?
They’re formulated to be mild, moisturizing, and pH-balanced (around 5–6). If you have very sensitive skin, we recommend patch-testing first.
What if my pump stops foaming well?
Clean the pump by following the Care Instructions. Residue buildup can reduce foam flow over time.
Is the bottle dishwasher safe?
No, we recommend hand washing it with warm, soapy water to keep it in good condition.
How should I store the tablets?
Keep them in a cool, dry place, away from moisture and humidity. Keep any partially used pouches sealed in an airtight container.